R51 Wide application integrated GNSS receiver
R51 Ubiquitous GNSS Receiver is based on GNSS high-precision positioning technology, MEMS sensor technology, 4G communication technology and single chip system technology research and development.
The whole system adopts a plug-in design, which greatly simplifies the installation process and improves work efficiency.
R51 is a low-power dedicated receiver for field geological disaster monitoring. Optional built-in lithium battery, solar panels are available.
The R51 universal GNSS receiver can be used with a third-party cloud platform to realize remote monitoring and management of equipment in the cloud.
Application field: can meet most needs of bridges, dams, mines, deformation monitoring
Signal tracking |
Accuracy Index |
Data interface: |
Physical properties |
|
BDS B1I/B2I/B3I |
Single point positioning: the unit is mm |
Data output: binary code, NMEA-0183Data refresh rate: default 1Hz, maximum 20HzBaud rate: 4800～406800Communication method: Full Netcom 4G, supportexternal communication moduleBluetooth: BT4.0, backward compatible with BT2.x,the protocol supports Windows/Android/IOS system | Working temperature: -45℃～+75℃ Storage temperature: -55℃～+85℃ Physical size: Φ196.7mm×129.5mm Protection class: IP67, floatable Humidity: 100% non-condensing Shock and Vibration: 2m drop resistance Indication: 6 LED indicators Weight: 1.65kg (including battery) |
Electrical parameters |
Operating mode |
Data output |
Inclination measurement parameters |
|
Power consumption: 1.5 ~ 4W, the power consumption depends on the communication method and GNSS board support power-on self-start,reverse polarity protection, built-in photoelectric isolation
|
Configuration mode: You can set the sampling frequency and upload interval independently of GNSS+MEMS data |
Differential data: RTCM2.X, RTCM3.X,CMR, CMR+ Data format: NMEA-0183, binary code |
Measuring range: ±90° Measurement accuracy: 0.1° Acceleration Measurement Parameters Measuring range: ±2g Measurement accuracy: 0.01g |
Interface mode |
Protocol |
|
|
| 1 9-pin aerial plug connector (1 solar,1 battery, 1 mains, 1 serial) 1 SIM card slot |
Network: TCP, MQTT, Ntrip Serial port: RS232 protocol, RS485protocol |
R51
Sobre nós
Shanghai AllyNav Technology Co., Ltd. foi criada em 2015. Com base na navegação GNSS, AllyNav expande a aplicação da indústria de ciências agrícolas, com foco em IoT agrícola, piloto automático de máquinas agrícolas e os algoritmos principais de autônomo. Nós exportamos para mais de 30 países como Canadá, Brasil, Argentina, Espanha, Rússia, África do Sul, Japão, Tailândia, etc Os produtos AllyNav fornecem aos agricultores soluções precisas e eficientes, para libertar as mãos dos agricultores e aumentar altamente a capacidade de produção.
Contacte-nos
ADICIONAR: 1.Room 201, edifício No.1, pista 215, estrada de Gaoguang, distrito de Qingpu, Xangai, China
TEL:+86 21-61200180
E-MAIL:globalsales@allynav.cn
Assinar
Copyright © 2023 Allynav All Rights Reserved |